Fusion F3 Table Saw - Safety -
10
© 2020 Laguna Tools
Grounding Instructions
TABLE A
Ampere Rating
Volts
Total length of cord in feet
120
25
50
100
150
240
50
100
200
300
more than not more
than
Minimum gage for cord
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
NO
NO
Grounding Methods
Fig 1. Grounding Methods Provided by CSA Group. (A) Receptacle with nominal rating less than 150 volts. (B) 150 volt
receptacle without grounding pin fitted with adapter. (C) Grounding receptacle adapter. (D) Receptacle with nominal rating
between 150 - 250 volts.
All grounded, cord-connected tools:
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
a)
Do not modify the plug provided; if it will not fit the outlet, have the proper outlet installed by a qualified
electrician.
b)
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding
conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding
conductor to a live terminal.
c) Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if
in doubt as to whether the tool is properly grounded.
d) Use only 3-wire extension cords that have 3-prong grounding plugs and 3 pole receptacles that accept the tool's plug.
e) Repair or replace damaged or worn cord immediately.
Summary of Contents for Fusion F3
