background image

-3-

www.igmtools.com

Obsah

1. Declaration of Conformity

1.1 Warranty

2. About this Manual

3. 18BX Specifications

3.1 Parts of the Bandsaw

3.2 Specification

3.3 Noise emission 

4. General safety

4.1 Safety instructions

5. Unpacking your machine

5.1 Transport and unpacking

5.2 Unpacking

5.3 What you will receive with the bandsaw

5.4 Locating your bandsaw 

 

5.5 Locking the bandsaw

6. Assembly and set up

6.1 Assembling the rubber feet 

6.2 Assembling the optional mobility kit

 

6.3 Fitting the table

 

6.4 Fitting the table rule

 

6.5 Fitting the fence

 

6.6 Fitting the table insert and Fence Stopper

 

6.7 Fitting the optional light

 

6.8 Connecting the bandsaw to the 

electricity supply

7. Testing the bandsaw

7.1 Before starting the bandsaw

 

7.2 Fitting a blade to the bandsaw

7.3 Tracking the blade

7.4 Tensioning the blade

7.5 Adjusting the blade guards

7.6 Adjusting the blade guides

8. Using the bandsaw

8.1 Adjusting the fence

 

8.2 Selecting the Right Blade

 

8.3 How to coil a bandsaw blade

 

9. Maintenance
10. Troubleshooting

________________________________ 

 

1. Declaration of Conformity

We declare that this product is in compliance 

with the directive and the standard mentioned 

on the previous page of this manual.

1.1 Warranty

IGM Tools & Machinery strives to always 

deliver high-quality machinery. The warranty is 

governed by the valid terms and conditions of 

IGM Tools & Machinery available at  

www.igmtools.com.

2. About this Manual

This manual is intended to thoroughly cover 

the setup up, maintenance, and proper 

adjustments of your new purchase. Aside from 

the proceeding general safety considerations, 

this manual 

DOES NOT

 cover woodworking 

or metalworking techniques that are possible 

with this product and the appropriate safety 

precautions necessary for safe practices. There 

are several organizations with published safe 

practices, techniques, and proper operation of 

this tool. Or look for handy tips and instructions 

at www.igmtools.com.

3. 18BX Specifications

The bandsaw is generally defined as a saw 

blade in the form of an endless steel band that 

rotates around two or more wheels. This blade 

is a continuous metal band with teeth on one 

side. As the wheels rotate, so does the band, 

which creates the continuous sawing action.

3.1 Parts of the Bandsaw

  1. Tension indicator window 

  2. Switch 

  3. Motor 

  4. Frame 

  5. Blade tension handle 

  6. Blade tracking window 

  7. Cast iron table 

  8. Blade guide adjustment hand wheel 

  9. Blade guide 

10. Rip fence assembly

11. Dust port 100mm

12. Quick-release blade tension lever

13. Blade tracking knob

14. Optional mobility kit

15. 400V power socket

16. Blade guide shaft lock knob

17. Flywheel

18. Brake foot pedal

Note:

 Mobile stand and lighting are optional 

accessories

EN - English

Operating Instructions 

(original)

Dear Woodworker,

Thank you for your purchase and welcome to the 

Laguna Tools

 group of discerning woodworkers. We understand that you have a 

choice of where to purchase your machines and appreciate the confidence you have in the Laguna Tools brand.

Every machine manufactured by Laguna Tools has been carefully designed and well thought through from a woodworker’s perspective. 

Through hands-on experience, Laguna Tools is constantly working hard to make innovative, precision products. Products that inspire 

you to create works of art, are a joy to run and work on, and encourage your performance.

This bandsaw is designed to give you years of safe service. Read this owner’s manual in its entirety before assembly or use.

Summary of Contents for 18bx



















Reviews: