Laguna Tools Smartshop II Series, Manual

Page: 43 / 69

43
9) With the spindle over the front left corner of the spoil board and (G54)
selected, press (Teach ZPO) (zero point offset) to select the front left of
the spoil board as the work offset (X and Y Zero)(origin) for your
software’s starting point when running code.
10) Press (PROG) membrane switch to jump to the Program screen.
11) Manually insert your fly cutter for facing the spoil board. Press the manual
tool release near the spindle and hold the cone into the spindle opening
and release the tool release button; you will feel the tool holder get drawn
upward as it is locked into place.
12) Press the (TOOLS) membrane switch to access the first tooling screen.
13) Using the drop-down menu, select tool #8 and input the number 8 in the
green field (Set Tool In Spindle). This will set up the system for touching
off the spoil board cutter to Z zero later in these instructions.
14) Press (NEXT) to access the second tooling screen.