![Laguna Tools Smartshop II Series Manual Download Page 39](http://html1.mh-extra.com/html/laguna-tools/smartshop-ii-series/smartshop-ii-series_manual_3315677039.webp)
39
Tools 2 screen.
NOTE:
Only one field on this page pertains to daily operation, (Z spoil). All
other fields are for setup and technical support of the controller and will be
covered in the advanced section of the manual.
1)
(Z spoil) is a user field that is required when using a spoil board to tell the
tool table the actual position of Z Zero of each tool. After fly cutting both
sides, the operator needs to input the thickness of the spoil board using
precision calipers so the tool length can be adjusted accordingly.
Summary of Contents for Smartshop II Series
