Laguna Tools PX-20 SHEARTEC II, Owner'S Manual

Page: 31 / 76

31
4c.) To Adjust Pressure & replace the pressure Springs for the Top Roller-
1.) On the Top of the exposed Carbide Blade Roller area, locate 4 large Allen Set Screws on the
Corners of the Planer
(See Figure J), to adjust the amount of pressure (Increase/Decrease) on the
Top Roller, use appropriate T-Wrench as pictured below. If the pressure needs to be increased
turn Allen Set Screws-Clockwise, to decrease pressure turn Allen Set Screws-Counterclockwise
(See Figure J)