Laguna Tools PX-20 SHEARTEC II, Owner'S Manual

Page: 39 / 76

39
Operation-
1.) Establish the proper depth of cut (Equal to or less than 1/16”), using either the
DRO (Digital Read Out) or Scale .
2.) Pull out and lock each extension roller to support long stock.
3.) Start Dust Collection Machine.
4.) Start Planer.
5.) Adjust & Set Feed Rate Speed (See Fig. C Below) to desired Speed (16 or 28 FPM), while
planer is running.
CAUTION!- PLACE THE PLANER ON A “ SECURE AND STABLE SURFACE ” FOR
OPERATION. “ CLAMP OR BOLT ” THE PLANER INTO POSITION.
“On/Off’ Switch
WARNING!-
“THIS ACTION WILL VOID WARRANTY!” IF OPERATOR DOES NOT ADJUST
DESIRED SPEED
WHILE PLANER IS RUNNING
.