Laguna Tools PX-20 SHEARTEC II, Owner'S Manual

Page: 61 / 76

61
Lubrication (Cont’d.) -
(Instructions on how to remove Gear Box Oil Cover & change Inner Gears is as follows- Cont’d. )
Tools to Use- T25 Torx Wrench.
1.)
Safety-Shut Down all Power to PX-20 Planer, Pull Electrical Plug from Outlet.
2.) Remove Part#135 (M6 Cap Screw), 136-M6 Washer.
3.) Remove Pt. #166-Side Cover-R.
4.) Remove the Drive Chains, Pt.#138 &139, then remove Pt.#140-Chain Sprocket, Pt.#98 Hex
Screw & Pt.# 99 Washer.
5.) Remove Parts #97- Shaft, #96-Retaining Ring, #95-Knob, #98- Hex Screw, #99-FlatWasher, and
Pt.#100- Chain Sprocket.
6.) Remove
Part’s., .1-Roller, .2-Roller Bracket, & .3-Hex Screw.
7.) Remove Pt.# 101- Shoulder Screw, Pt.#102-Spring Washer, Pt.#153-Cap Screw.
8.) Remove Gear Box Cover-#105.
9.) Oil Inner Box mechanism with
#80 Weight Oil .
10.) Replace Gear Box Cover-#105. Replace and Install Parts in Reverse Order.
•
All chains must be lubricated regularly.
•
Every 30 hours, lubricate the bushings.
•
Lubricate the four lead screws regularly.
•
Teflon Lube is the preferred lubrication for the lead screws.