Laguna Tools PX-20 SHEARTEC II, Owner'S Manual

Page: 30 / 76

30
4a.) Table Bottom Roller Adjustment (Cont’d.) :
1 .) Cont’d.) Place Gauge Block on either side of the Bottom Roller, to assure that Bottom Roller
recess is at the same height set across the table.
2.) Turn the knobs (See Figure G) to move the table roller up or down to the desired position,
then secure Bottom Roller in position.
4b.) Top Roller Adjustment Procedure (Cont’d.) -
1.) When appropriate level is reached, on the Table Height Adjustment Wheel side, open or
remove the Panel Cover, just below the main Top Roller Axel
(Figure H) there is Adjustment Bolt
to adjust the height and the Hex Nut, tighten to secure and lock height of the Top Roller.
(Figure H)
Wrench to use on
the Adjusting bolt
& Lock Hex Nut for
the Top Roller.