11)
No smoking!!
Please do not smoke while operating the machine.
12)
Have your machine repaired by a qualified person.
Repairs should only be carried out by specially trained, qualified people, using original spare parts;
failure to do this may result in injury or death.
13)
Check any damaged parts.
Before using the machine further, the guard or other damaged part should first be carefully
checked to determine if it will operate properly and perform its intended function. Check the
alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced.
14)
Waste Disposal
Dispose of all waste with extreme care, and in accordance with local regulations.
15)
Fire extinguisher:
The workshop of the user must be equipped with a fire extinguisher, or other device specified by
local safety regulations.
16)
Stand in a proper position for operation.
Please stand in front of machine for operation.
17)
Use recommended auxiliary equipment.
Please consult the “drawings” section of the operation manual for recommended auxiliary
equipment and accessories.The use of improper accessories may result in personal injury.
If auxiliary equipment is removed, the original guards or safety devices must be replaced.
OAV is responsible for a connection of the machine to auxiliary equipment only if the auxiliary
equipment has been designed or specifically approved by OAV for used with this machine.
18)
Reduce the risk of unintentional starting.
Make sure the switches on the control panel are in the OFF position before operating.
19)
Never leave the machine running unattended.
Turn the main power off before leaving the
machine unattended. Do not leave the machine until all moving parts come to a complete stop.
20)
Make sure the machine is disconnected from the power supply:
Make sure the machine is disconnected from the power supply before beginning any
maintenance, service, adjustments, or repairs.
7
Summary of Contents for MPSP12-4-0135
