(17) Crosscutting
This saw can crosscut full size panels with the fence in
the forward or rear position, although it is easier to load full
size panels with the crosscut fence mounted in the forward
position. (Fig. 17A)
Mounting the crosscut fence in the rear position gives
greater stability for crosscutting smaller panels. (Fig. 17 B)
Fig. 17A
Lastly, this machine has capability of crosscutting
work piece while using the rip fence
as a cut-off gauge. (Fig. 17 C)
Crosscutting using rip fence as a cut-off gauge
:
:
:
:
1. Install the crosscut fence in the rear mounting points (Fig. 17 D)
and lock it in place.
2. Position the rip fence for the desired width.
3. Load the work piece onto the table saw.
4. Slide the leading end of the rip fence behind
the back edge of the blade. (Fig. 17 D)
5. Take all the necessary safety precautions,
then perform the cutting operation.
Miter Cutting
The miter fence allows miter cuts from 0° through 135°.
The table mounted miter scale has a resolution of 1°.
1. Slide the crosscut table to the front edge of the sliding
table and lock it in place.
2. Place the crosscut fence center stud in the center stud
hole of the crosscut table. The fence can be installed
for 90° to 135° cuts (Fig. 17 E), or 0° to 90° cut.
3. Rotate the fence to the desired angle and use lock knob
to lock the fence in place.
4. Position the flip stop according to the length of the
work piece you want to cut off to the left of the blade.
5. Load the work piece onto the table saw.
6. Once all the necessary safety precautions have been taken,
perform the cutting operation.
forward
mounted
crosscut
Rear mounted
crosscut fence
optional
Fig. 17 A
Fig. 17 B
Fig. 17 C
Fig. 17 D
Fig. 17 E
22
Summary of Contents for MPSP12-4-0135
