Laguna Tools MPSP12-4-0135, Manual

Page: 13 / 58

(3) Crosscut fence
1. Slide the center stud(M8x1.25), T-bolt (M8x12.5px60) , T-nut (M8x1.25) into crosscut fence T-slot. (Fig. 3C)
2. Insert the crosscut fence to the crosscut table, align the center stud, T-bolt, T-nut to the position. (Fig.3A)
3. Hold the crosscut fence again the 90 degree stop bolt, tighten with the knob to lock the crosscut position. (Fig. 3B)
90 degree stop can do the micro adjustment to be 90 degree (square) with the blade.
4. Install the flip stops in the T-slot on the crosscut fence use knob to secure (Fig. 3C item no. 2),
Use the knob the fasten the end of the extendable end of the fence. (Fig. 3C item no. 3 &4),(Fig. 3D)
Fig. 3A
Fig. 3C
Fig. 3B
Fig. 3D
Crosscut
fence
90 degree stop
14