Laguna Tools METAL PRO Series, Manual

Page: 37 / 66

37
4. If the conveyor is running to the left, turn the left-hand adjusting screw
clockwise.
5. Once the conveyor is running centrally, stop the conveyor and replace
the steel cover.
Conveyor tensioning.
To increase the tension on the conveyor belt, turn the adjusting bolts
clockwise. To reduce the tension on the conveyor belt, turn the adjusting
bolts counterclockwise.
Note. Adjust both adjusting bolts the same amount or the tracking will be
affected.
Motor drive V-belt adjustment.
Lock nut Break
Sanding head drive motor
Adjusting nut Lock nut
Conveyor drive motor
Sanding head drive motor V-belt adjustment/tension.
The sanding head drive motor has a brake that is activated when the power
is removed from the motor. The brake is air activated and should not need
any regular servicing.
The drive V-belts will need to be adjusted from time to time. To adjust,
loosen the lock nut and turn the adjusting nut (under bracket) until the
correct tension is achieved. Do not forget to re-tighten the lock nut after the
adjusting has been completed.
Note. Never access the motor with the power connected to the sander.