Laguna Tools METAL PRO Series, Manual

Page: 12 / 66

12
17 19
16 18
19 20 21
16. Spacer 19. Sanding Belt Adjuster
17. Clamp 20. Sanding Belt Oscillation Piston
18. Sanding Belt Tension Knob 21. Sanding Belt Tension Piston
16. Spacer.
The spacer is used to support the sanding head to the body of the
machine. The spacer is removed when changing sanding belts.
17. Clamp
The clamp secures the sanding head to the machine frame.
18. Sanding belt tension knob.
The belt tensioning knob controls the amount of pressure that the piston
exerts on the sanding belt.
19. Sanding belt adjustor.
The sanding belt adjustor is used to adjust the belt centrally on the top
roller.
20. Sanding belt oscillation piston.
The sanding belt oscillation piston moves a cam that is attached to the top
sanding roller. This action changes the angle of the top roller and oscillates
the belt along the rollers.
21. Sanding belt tension piston.
The piston keeps a constant pressure on the sanding belt and is retracted
to allow the belts to be changed.