Laguna Tools METAL PRO Series, Manual

Page: 25 / 66

25
HINT, Setting Depth of Cut.
If you are not certain setting the depth of cut; Measure the thickness of the
stock. Place the stock on the conveyor under the sanding head (with
abrasives installed). Raise the conveyor bed by hand using the handwheel
until the stock is touching the abrasive belt and the belt can be rotated
using hand pressure. Note the height setting on the DRO, lower the
conveyor bed, remove the stock. Reset the thickness to the DRO setting.
Start machine and process stock.
Setting the display to metric or inches.
Press the set button for 10 seconds, and the display will change from
inches to metric, or vice versa.
Down limit switch.
Belt speed adjuster Limit switch
Limit switch
The sander is fitted with a limit switch located at the back of the machine.
This limit switch limits the down travel of the bed.