Laguna Tools MDM2030-0148, Manual

Page: 9 / 50

9
1. CABINET
The cabinet has a large footprint and is a welded construction manufactured
from heavy gauge steel plate. The cabinet houses all the parts of the machine
and the heavy construction ensures that the
machine is stable. This weight also helps to
absorb any vibration that is produced during
cutting.
2 / 10. ELECTRICAL SYSTEM
The electrical system consists of an
electrical motor controlled by a VFD
(variable frequency drive), start switch, stop
switch, limit switches, door switch, contactor
and internal breaker. No cable or plug is
supplied as the length of the cable and the
type of plug will be dependent on your
installation.
3. REAR ACCESS DOOR
The rear access door allows access to the
motor and other parts of the machine
4. AIR CONNECTION
The pneumatic control system consists of a
number of valves and control switches that
are located inside the machine cabinet and
are accessible if you open the door. A
consistent dry clean supply pressure of 6.5
bar minimum is required for the machine.
5. DUST COLLECTION
A dust collection port is located at the back
of the machine and is 5" diameter. It
connects to the bottom of the spindle hood.
6. FRONT ACCESS DOOR
The front access door allows access to the
height turret and various switches.
Electrical cabinet
Pneumatic control system
View through front door