Laguna Tools MDM2030-0148, Manual

Page: 6 / 50

6
NOTES CONCERNING NOISE EMISSION:
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors a ecting the true level of exposure to operators are clearly the amount of
time exposed, the characteristics of working environment other sources of dust
and noise etc. For example, adjacent machines in other words the level of
ambient noise. It is possible that exposure level limits will vary from country to country.
We recommend that you ware noise protection equipment at all times when
operating the machine.
Speci cation MDM2030-0148 MDM2050-0148
Table dimensions 66” x 12.25” 66” x 12.25”
Cutter capacity 7 Diameter 4 7 Diameter
Spindle diameter X height 1.25 Diameter x 5
adjustable heights
1.25 Diameter x 5
adjustable heights
Spindle speeds 6000 to 80 00 RPM 6000 to 8000 RPM
Motor power 7.5hp 220v 3-phase w/
VFD
10hp 220v 3-phase w/
VFD
Dust collection diameter
[hood]
5 inch 5 inch
Machine weight 1400 lbs 1400 lbs
Job clamp Yes Yes
Tool kit Yes Yes
Compressed air
requirement
90 PSI 1 CFM 90 PSI 1 CFM
Maximum material
thickness
1.25 1.25
Maximum arch height 2 standard 2 standard
Maximum arch width 24 24
Note. It is probable that a third party will deliver your machine.
Before you unpack your new machine you will need to rst inspect the packing,
invoice and shipping documents supplied by the driver. Insure that there is no
visible damage to the packing or the machine. You need to do this prior to the
driver leaving. All damage must be noted on the delivery documents and signed
by you and the delivery driver. You must then contact the seller [Laguna Tools]
as soon as practical. If damage if found after delivery, contact the seller as soon
as practical.
Noise Emission
Specification Sheet
Receiving Your Machine