Lagler UNICO, Operation, Maintenance And Safety Manual

Page: 7 / 56

UNICO 01.02.2013
English / Englisch
WARNING!
RISK OF EXPLOSION due to sparks while sanding or a high dust
concentration in the air:
• Do not use the machine near
- sources of fires,
- flammable liquids or gases,
- potentially explosive areas!
• Do not smoke in a dusty environment, e.g. while sanding or
emptying the dust bag!
RISK OF FIRE from spontaneous combustion or from sparks while
sanding:
• There is a high risk of fire when sanding woods with a large
amount of resin, oiled or waxed floors or metal! Therefore,
the machine must always be cleaned carefully directly after
sanding! Be certain to note the warning notices of the paint,
oil and wax manufacturers!
• Cloths, pads, et cetera which have been immersed in oil or wax
can spontaneously combust! Be certain to note the warning
notices of the paint, oil and wax manufacturers!
• The dust bag must always be removed from the machine
after sanding and emptied into a non-combustible con-
tainer outdoors! Cover this container with a non-combustible
cover and be certain to store it and the dust bag outdoors
( Section 5.3, Removing and emptying the dust bag )!
RISK OF FIRE from the overheating of the cables:
• Only use motor cables and power cables with three wires
and wire cross-sections of at least 1.5 mm²
HEALTH RISK caused by dust:
• Make sure that the dust bag is properly fastened to the ma-
chine!
• If the machine is operated correctly, the mandatory dust
emission values will not be exceeded! When emptying the
dust bag outdoors, a respiratory protective mask (at least
filter class P2) must be worn!
• A respiratory protective mask (at least filter class P2) must
be worn when conducting other work that creates dust, e.g.
cleaning of the machine!
HAZARD WARNINGS AND SAFETY INSTRUCTIONS
2
7