UNICO 01.02.2013
English / Englisch
WARNING!
RISK OF DEATH from electrical shock and RISK OF INJURY from
rotating parts of the machine:
•
All extensive maintenance work, especially on the electri-
cal equipment, must be conducted by a qualified expert for
safety reasons!
•
All maintenance work must be conducted with the machine
switched off and with the power plug removed from the
socket!
From time to time, but never any later than the time when damage
is detected, you must carry out various maintenance tasks. Work at
a clean, well illuminated location and proceed according to these
instructions. In the tool bag you will find the necessary tools in order
to be able to carry out the tasks described below.
Maintenance work and replacement
of wearing parts
7
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
6.2 MACHINE
STORAGE
WARNING!
RISK OF FIRE from spontaneous combustion or the formation of
sparks while sanding:
Always transport and store the cleaned machine without the
dust bag! Store the used dust bag in a closed non-combustible
container!
Whenever the machine is to be stored for a longer period of time,
provide a dry, frost-free storage location without excessive tem-
perature variations.
7
ATTENTION!
•
Only use original spare parts from
LÄGLER
®
! This is the only way to
ensure that your machine continues
to perform! Warranty claims for third-
party parts will not be honoured!
•
Never conduct the maintenance work
and replacement of wearing parts on
the newly sanded wooden floor! You
could cause scratches or other damage
to the floor!
•
Never use any cleaning products which
contain solvents!
31
Summary of Contents for UNICO
Page 46: ...UNICO 01 02 2013 English Englisch SPARE PARTS 46 11...
Page 48: ...UNICO 01 02 2013 English Englisch SPARE PARTS 48 11...
Page 50: ...UNICO 01 02 2013 English Englisch SPARE PARTS 50 11...
Page 52: ...UNICO 01 02 2013 English Englisch SPARE PARTS 52 11...
