TRIO 01.04.2015
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
Fig. 88
Hook the on/off switch into the transport holder
on motor switch box.
Fig. 87
Loosen the ring nut (1) and remove the cable plug
from the switch (2).
Fig. 86
Bring the machine back into vertical position.
Fig. 89
Pull the suction hose from the neck of the upper
part of the separator.
7.5 CHANGING THE V-BELT
Always only use original LÄGLER
®
V-belts (part number in
Section 11, Spare parts TRIO
).
If the V-belt shows signs of wear and tear it needs to be replaced.
7.5.1 REMOVING THE V-BELT
1
Switch off the machine and pull the power plug out of the
socket!
2
Remove the tooth belt (
Section 7.4,1, Removing the tooth
belt
).
3
Bring the machine back into vertical position (fig. 86).
4
Loosen the cable plug of the sensor on the on/off switch by
turning the ring nut
counterclockwise
(fig. 87. 1) and pull the
cable plug off (fig. 87. 2).
5
Remove the on/off switch from the chassis (fig. 88, 1) and hook
it into the transport holder on motor switch box (fig. 88, 2).
6
Pull the suction hose from the neck of the upper part of the
separator (fig. 89).
48