TRIO 01.04.2015
English / Englisch
Fig. 35
The sanding screens are fixed quickly and
securely to the pad base using the plastic plug.
Fig. 34 Place the normal pads directly on the sanding
plates.
WORKING WITH THE TRIO
5
5.3.2 CONVERSION TO SANDING SCREENS
1
Switch off the machine and pull the power plug out of the
socket!
2
Release the clamping lever of the handle (fig. 24, 1), press
the handle forward (fig. 24, 2) and pull the clamping lever
back into its prior position (fig. 24, 3).
3
While holding on to the handle, carefully tilt the machine
backwards into a horizontal position (fig. 25). Make sure that
the machine gets to rest on the guide tube (fig. 26,
A
) and the
two protective rubbers (fig. 26,
B
).
Make sure the machine
is in a safe position!
Now the sanding plates are accessible
from the front.
4
Remove the three sanding discs and flexible Velcro rings
(fig. 32) and replace them by normal pads (fig. 34).
5
Place the sanding screen on the pad base. Insert the plastic
plug through the sanding screen into the central hole in the
sanding plate (fig. 35).
To remove a sanding screen, grasp beneath it using both
hands and pull this evenly off the sanding plate together with
the plug.
6
Bring the machine back into vertical position so that the
sanding plates are resting flat on floor surface (fig. 29).
7
Release the clamping lever of the handle (fig. 30, 1), adjust
the handle height to your convenience (fig. 30, 2) and pull
the clamping lever back into its prior position (fig. 30, 3).
5.3.3 CONVERSION TO PADS
1
Switch off the machine and pull the power plug out of the
socket!
2
Release the clamping lever of the handle (fig. 24, 1), press
the handle forward (fig. 24, 2) and pull the clamping lever
back into its prior position (fig. 24, 3).
3
While holding on to the handle, carefully tilt the machine
backwards into a horizontal position (fig. 25). Make sure that
the machine gets to rest on the guide tube (fig. 26,
A
) and the
two protective rubbers (fig. 26,
B
).
Make sure the machine
is in a safe position!
Now the sanding plates are accessible
from the front.
30