TRIO 01.04.2015
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
Fig. 83
Twist the counter nut to the clamping nut.
Fig. 84
Carefully fasten the two nuts.
Fig. 85
Replace the cover and fix it in place using the
eight screws.
4
Twist the counter nut to the clamping nut (fig. 83).
5
Carefully fasten the two nuts (fig. 84).
6
Put the cover back on in the proper position. The seal must
be positioned evenly around the pulleys. Use two screws to
hold it in place initially before replacing the other screws
(fig. 85).
7
Tighten all eight screws equally tight.
8
Mount the sanding plates or milling discs of your choice
(
Section 5.2.2, Mounting the sanding plates
).
9
Tilt the machine back into the vertical position and adjust
the handle height to your convenience.
47
