SINGLE 01.06.2019
English / Englisch
Fig. 18
Pull the adjusting lever to release the lock (1)
and push the guide tube up until it reaches the
mechanical stop (2).
Single
22
11
WORKING WITH THE SINGLE
5.2 CHANGING THE SANDING PLATE
5.2.1 REMOVING THE SANDING PLATE
1
Switch off the machine and pull the power plug out of the
socket!
2
Pull the adjusting lever on the handle towards you to release
the lock of the guide tube (fig. 18, 1). Push the guide tube into
and past the vertical position until it reaches the mechanical
stop (fig. 18, 2).
3
Release the adjusting lever so that the guide tube can engage
again (fig. 19, 1). Carefully tilt the machine backwards on the
wheels. As you do so, steady the machine with your foot to
stop it rolling away (fig. 19, 2).
Please ensure that the machine is stable before commencing
work!
4
Turn the sanding plate clockwise (fig. 20, 1) and you can then
remove it from the machine (fig. 20, 2).
Fig. 19
Release the adjusting lever (1) and carefully tilt
the machine backwards. Steady the machine with
your foot to stop it rolling away (2) and
ensure that
the machine is stable
!
5
!
22
11
Fig. 20 Turn the sanding plate
clockwise
(1) and remove
it from the machine (2).
22
11
26