SINGLE 01.06.2019
English / Englisch
INTRODUCTION
Introduction
1.1 FEATURES OF THE MACHINE
Fig. 1 shows the most important parts and assemblies which make
up the SINGLE. We recommend that you take some time to become
familiar with the machine.
1.2 DESCRIPTION OF THE MACHINE
The SINGLE single-disc sanding machine operates with a sanding
plate to which Velcro-backed sanding discs can be attached. Of
course, the conventional type of sanding disc with a fastening
screw can also be used on the machine. The work zone is covered
by the machine housing. In the machine housing, the electric motor
is mounted vertically together with the gear. It is protected from
sanding dust by the motor cover. The plug for connection to the
mains is located on the machine housing. The motor switch with
the switch positions ON/OFF is located in the handle at the top end
of the guide tube. The machine is moved with this handle. At the
back of the machine are two wheels which the machine runs on
when it is moved.
1.3 INTENDED USE OF THE MACHINE
The SINGLE single-disc sanding machine is suitable for sanding
wooden and cork floors and for work on floor underlays in the
professional and DIY rental sectors. It can also be used for
spreading care products and cleaning agents and for polishing
floors.
Any application other than that described here is inadmissible
without the consent of the manufacturer!
1
You have purchased a high-quality product
from LÄGLER
®
. We wish you a great deal
of success with your SINGLE. All LÄGLER
®
products are subjected to a thorough
inspection before leaving the factory.
R e a d t h e s e o p e r a t i n g i n s t r u c t i o n s
completely before working with the
SINGLE for the first time! These operating
instructions include important information
on occupational safety and will provide
you with answers to many questions
so that you can work with the machine
safely and without any problems. If you
cannot find a specific subject in these
operating instructions, please read
the LÄGLER
®
application technique
manual “Sanding of wooden floors”
(www.laegler.com) or contact our service
department, your retailer or your importer.
WARNING!
RISK OF DEATH from electrical shock:
The machine may never be used for wet
processing operations of any kind!
5
