SINGLE 01.06.2019
English / Englisch
RISK OF FIRE from sparks while sanding or from spontaneous
combustion:
•
Cloths, pads, et cetera which have been immersed in oil or
wax can spontaneously combust!
Be certain
to note the
warning notices of the manufacturers of paint, oil and wax!
•
Be certain
to note the instructions of the vacuum cleaner
manufacturer for emptying the dust bag or disposing of the
dust!
RISK OF FIRE from the overheating of the cables:
•
Only the following motor cables and power cables may be
used:
- Machines with motor for mains voltage
220 V
or
230 V
:
Cables
with
three
wires! Each wire must have a cross-
section of
at least
2.5 mm² (0.0039 sq.in.)!
- Machines with motor for mains voltage
400 V
:
Cables with
five
wires! Each wire must have a cross-
section of
at least
1.5 mm² (0.0023 sq.in.)!
•
The
maximum
cable length in order to connect the machine
to the mains supply must not exceed 20 m (790”)!
HEALTH RISK caused by dust:
•
Use only external vacuum cleaners approved for your work!
•
Ensure that the external vacuum cleaner is properly
connected to the machine (
Section 5.6, Attaching an
external vacuum cleaner
)!
•
Clean the machine regularly! Dust and deposits in the
machine housing reduce the suction performance and the
dust load at the workplace increases excessively!
•
If the machine is operated
correctly
with a suitable vacuum
cleaner, the mandatory dust emission values will not be
exceeded! When sanding
without
a vacuum cleaner
connected, a respiratory protection mask (at least filter class
P2)
must be
worn!
•
Always wear a respiratory protective mask (at least filter
class P2) when executing works which might create dust,
e.g. cleaning of the machine!
HAZARD WARNINGS AND SAFETY INSTRUCTIONS
2
WARNING!
10
