SINGLE 01.06.2019
English / Englisch
WORKING WITH THE SINGLE
5.4 ADJUSTING AND REPLACING THE CABLE
HOLDER
5.4.1 ADJUSTING THE CABLE HOLDER
The cable holder positions can be adjusted individually along the
groove on the guide tube of the machine.
1
Using a hexagonal socket wrench, slacken the screw in the
middle of the cable holder just enough to let you slide the
cable holder along the groove with the sliding block (fig. 26).
2
Slide the cable holder into the position you want it in and
tighten the screw again. As you do so, the sliding block turns
so that the cable holder is clamped in place (fig. 26).
5.4.2 REPLACING THE CABLE HOLDER
1
To remove or replace a cable holder, slacken the screw in the
middle of the cable holder.
Do not
remove the screw entirely
from the sliding block! You can now remove the cable holder
together with the sliding block (fig. 27).
2
To mount a cable holder, push the screw with its washer into
the hole on the cable holder and on the other side, screw the
sliding block loosely onto the screw.
3
Push the sliding block into the groove on the guide tube
(fig. 28, 1) and tighten the screw (fig. 28, 2). As you do so,
the sliding block turns so that the cable holder is clamped
in place.
5.5 ATTACHING THE FLUFFY SEALING STRIP AS
PROTECTION AGAINST DUST
A fluffy sealing strip around the circumference of the machine
improves the dust suction results by sealing off the gap between
the working area of the machine and the floor.
You should attach the strip to the machine so that when the sanding
plate is mounted, the strip is in contact with the floor right round
the circumference of the machine (fig. 29).
5
Fig. 27
Release the screw (1), do
not
remove it completely.
Then remove the cable holder
with
the sliding
block (2).
Fig. 28
Insert the sliding block in the groove on the guide
tube (1) and tighten the screw (2).
1.
22
11
2.
22
11
Fig. 26
Release the screw, do
not
remove it completely.
Then move the cable holder with the sliding block
and tighten the screw again.
Fig. 29
Attach the fluffy sealing strip.
29
