LAFI-SA IVE-1004D-1008C-1016C, User Manual

Page: 15 / 48

- 14 -
Play speed
-
◀◀
/
▶▶
x8, x32, x128 supported
How to use Playback bar
- Play starts with PLAY button.
If you press PLAY button in LIVE mode, or select one thing in SEARCH SUB-MENU, DVR will prepare
to play the recording data from the point you selected
- Playback mode changing
To display different screen mode, click the Monitor Icon on screen and select different mode.
You can control playback speed with
◀◀
/
▶▶
button. Click
◀◀
/
▶▶
button once then it will
be x8, twice will be x32 then 3 times click is x128.
After clicking
■
(stop button) , message will pop up in case of clicking by mistake.
3.3.3. Other Icons
3.3.3.1 HDD STATUS
It indicates capacity of HDD, the percentage show the usage of HDD.
3.3.3.2. SCREEN SHOW STATUS
You can select how screen will display.
In Live MODE, there are 5 modes : PIP, POP, Sequence, Quad, 9
But the 9 cannot operate in 4 channels.
In play mode, there are 2 modes : Quad, 9,
Also, only quad mode can be operated in 4 channels.
3.3.3.3. CHANNEL ICON
You can change channel displays on screen. There are 1~4 in 4ch product, and 1~8 in 8ch.
3.3.3.4. USB ICON
This Icon will be shown after you attach USB into DVR,
3.3.3.5. NETWORK ICON
This Icon will be shown while someone access DVR through Network with CMS, or Web-viewer.
3.3.3.6. Remote controller ID Icon
This Icon will be shown if you set up system ID in system sub-menu.
The color of number of Remote control Icon will be changed to “Yellow” in case that status is
active, that is the number of remote controller matches the number of system ID.
Otherwise, the color will be changed to “RED”.
If you click Remote control ID Icon, you can see the below;
Status = Active [or De-active]