Version 3.11
| HPI Combi Flow User Guide |
7
www.lafert.com
500 – 600 Volt, 3 Phase Input
Non-Switched
With Disconnect
Frame
kW
HP
Amps
Low Harmonic
XCF3-26B-00AMXX
XCF3-26B-00EMXX
2
0.75
1
2.1
No
XCF3-26C-00AMXX
XCF3-26C-00EMXX
2
1.5
2
3.1
No
XCF3-26D-00AMXX
XCF3-26D-00EMXX
2
2.2
3
4.1
No
XCF3-26F-00AMXX
XCF3-26F-00EMXX
2
4
5
6.5
No
XCF3-26G-00AMXX
XCF3-26G-00EMXX
2
5.5
7.5
9
No
XCF3-36H-00AMXX
XCF3-36H-00EMXX
3
7.5
10
12
No
XCF3-36I-00AMXX
XCF3-36I-00EMXX
3
11
15
17
No
XCF3-36J-00AMXX
XCF3-36J-00EMXX
3
15
20
22
No
XCF3-46K-00AMXX
XCF3-46K-00EMXX
4
18.5
25
28
No
XCF3-46L-00AMXX
XCF3-46L-00EMXX
4
22
30
34
No
XCF3-46M-00AMXX
XCF3-46M-00EMXX
4
30
40
43
No
2.4.2. IP55 Enclosed Units
200 – 240 Volt, 3 Phase Input
Model Code
Frame
kW
HP
Amps
Low Harmonic
XCF3-52J-F0NMXX
5
15
20
61
Yes
XCF3-52K-F0NMXX
5
18.5
25
72
Yes
XCF3-52L-F0NMXX
5
22
30
90
Yes
380 – 480 Volt, 3 Phase Input
Model Code
Frame
kW
HP
Amps
Low Harmonic
XCF3-54M-F0NMXX
5
30
40
61
Yes
XCF3-54N-F0NMXX
5
37
50
72
Yes
XCF3-54O-F0NMXX
5
45
60
90
Yes
500 – 600 Volt, 3 Phase Input
Model Code
Frame
kW
HP
Amps
Low Harmonic
XCF3-56N-00NMXX
5
37
50
54
No
XCF3-56O-00NMXX
5
45
60
65
No
2.4.3. Low Harmonic Variants
The majority of the HP Combi Flow product range is based on a low harmonic solution using film capacitor technology to achieve
compliance with EN 61000-3-12 without the need for any additional equipment. This standard specifies limits for harmonic currents
for equipment connected to public low-voltage systems with input current > 16A and <= 75A per phase. It is important to understand
which models from the product range are of the low harmonic technology which is detailed below.
The HP Combi Flow three phase 200V (200-240V) input and three phase 400V (380-480V) input drives frame sizes 2 up to and
including frame size 5 are a lower harmonic drive using film capacitor technology. Please refer to the product rating tables in section
In short, this means that the low harmonic drives do not require an input choke and should not have one installed – drives outside of
the above frame sizes and supply voltage / number of phases, are of standard electrolytic capacitor design and could benefit from
the use of input chokes if further harmonic reduction is required.
2
General Information and Ratings
