30
| HPI Combi Flow User Guide |
Version 3.11
www.lafert.com
5. Keypad and Display Operation
The drive is configured and its operation monitored via the keypad and display.
5.1. Keypad and Display Layout
Control Keypad provides access to the drive parameters, and also allows control of the drive when Keypad Mode is selected in P1-12.
TFT Display
Main Displayed Parameter
Shows which of the selectable parameters
is currently being shown on the main display,
e.g. Motor Speed, Motor Current etc.
Operating Information
Provides a real time display of key operating
information, e.g. output current and power.
Quick Help Button
Provides access to short
description of the displayed messages.
Hand Button
Used to place drive in Hand (keypad) mode.
Start Button
When in Hand mode, used to Start the drive.
Stop / Reset Button
Used to reset a tripped drive.
When in Keypad mode, used to Stop the drive.
Flow 01
Drive Address
Drive serial communication address set
in parameter P5-01.
Navigate Button
Used to display real-time information,
to access and exit parameter edit mode
and to store parameter changes.
Auto Button
Used to place drive in Auto (Remote) mode.
Up Button
Used to increase speed in real-time
mode or to increase parameter values
in parameter edit mode.
Down Button
Used to decrease speed in real-time
mode or to decrease parameter values
in parameter edit mode.
STOP
15kW
400V
3Ph
HAND
AUTO
5.2. Selecting the Language on the TFT Display
Flow 01 Select Language
Select Language
STOP
Español
Deutsch
English
Español
Deutsch
English
15kW 400V 3Ph
Hold down the Start
and Up keys for >1s
Use the Up and Down
arrows to select a
language.
Press the Navigate
button to select.
5
LED K
eypad and Display Operation
