VitalsBridge Directions for Use
40
rev. A.5
Control Vital Signs for the VitalsBridge and the Patient Simulator
U
se the patient simulator’s application to control wheth
er ECG leads are placed, capnography is enabled, and whether
the SpO
2
probe in place by checking the “Learner Patient Monitor Buttons” on the Laerdal control panel for the vital
signs you would like to control.
Vital signs set in LLEAP will be communicated to the VitalsBridge Connector software. If the VitalsBridge is connected
and configured with a real patient monitor, the vital signs will be updated.
Refer to the patient
simulator’s
directions for use for more detailed instructions on how to control the vital signs.
Summary of Contents for VitalsBridge 100
Page 1: ......
