laerdal SimMan 3G Trauma, Directions For Use Manual, Page: 36 / 64

33
Setup for Simulation
Installing the Amputated
Lower Calf Skin
1
Access the ankle bolts by folding the skin up. Remove the ankle
bolts using two Phillips head screw drivers.
2
Carefully fold down the skin of the foot to expose the two pulse
units. Disconnect both units and route the wiring out of the foot.
Roll the wires together and store in the bottom of the ankle.
3
Apply a liberal amount of baby powder inside of the Amputated
Lower Calf Skin and lower leg. While matching the contours of
the skin to the calf, pull the skin up the manikin's lower leg untill it
fits tightly.
4 Connect the blood tubing to the blood port located on the
manikin's right side.