15
System Setup
The Instructor PC
The Instructor PC uses the Instructor Application software to manage
simulations. The Instructor Application runs in two modes:
•
Auto Mode
, for running pre-programmed, validated patient
cases.
•
Instructor Mode
, for on-the-fly, customized patient scenarios.
Auto Mode Overview
For more information on software and system setup, please see the
Help files:
Click Windows <Start> <All programs> <Laerdal SimMan 3G >
<Documentation>
3
4
5
2
6
7
8
9
10
11
1
1 - COMMON LEARNER EVENTS
The <Common learner events> window lists all required events
for a selected patient case. Clicking the events in the list records
them in the Session Log, together with the time that each event was
performed by the learner.
All other events available to the learner can be found under the <All
learner events>
2 - SIMULATION CONTROL GRAPH
The Simulation control graph illustrates the patient parameters in
terms of past, current, and predicted future trends throughout the
simulation.
3 - SIMULATION CONTROL PANEL AND
SESSION LOG
The <Simulation Control> panel contains the main tools used
in running the selected patient case. Parameters controlling the
underlying pathology in the simulation can be monitored, and modified
during a simulation session by using the <Simulation Control> panel.
The <Session Log> records information about events in response to
the patient case. This information is then made available in debrief files
at the end of the simulation session.
4 - ALL LEARNER EVENTS
The <All Learner Events> menu is used to register all other available
events, not listed under the <Common Learner Events>. Events can
be registered in any of the following ways to the <Session Log>:
• Using the <General Events> button
• Using the <Event Search> function
• Using the clickable manikin figure
5 - PERFORMANCE
The <Performance> window shows the effectiveness of learner
ventilations and compressions during the simulation.
Learner performance data can be viewed either as an average or in
real-time.
The performance window, below the manikin figure, is minimized as
default. Click the expand button to open the window.
6 - INSTRUCTOR’S PATIENT MONITOR
The Instructor’s Patient Monitor shows the status of patient’s vital
signs throughout the simulation.
7 – AIRWAY STATUS
The Airway Status window shows the state of the patient’s airway in a
real-time animation with a list of symptoms.
Indicators also show the resistance of the left and right lungs, and total
lung compliance.
Note: Ensure that you select the Airway Status tab.
8 - NEUROLOGY
<Neurology> - The Neurology status list shows information about
the patient’s position on the Glasgow Coma Scale and Visual Analog
Scale.
The <Eyes> animation is a real-time representation of the status of
the eyes of the patient/manikin and is shown when clicking on the
Neurology tab.
9 - CIRCULATION & FLUIDS
<Circulation & Fluids> - Displays information about the health of the
patient with regards to pulses, rate of bleeding, and secretions.
10 – BODY SOUNDS
Clicking the <Body Sounds> button calls up the <Body Sounds>
dialog box. The dialog shows the current sound scheme and volume
for each speaker attached to the various body parts: heart, bowel, and
anterior/posterior view of the lungs.
11 - TECHNICAL STATUS
The Technical status window provides information about the technical
status of the SimMan 3G Trauma manikin system, including battery
life, wireless (WLAN) connection signal strength, blood tank drainage,
communication channels in use and video recording.
Summary of Contents for SimMan 3G Trauma
