19. How to access the programming mode
NOTE
ONLY
if the item “
Customer Progr.
” is set on “
YES
"
and the item “
Program. block
” is set on “
NO
".
To access programming press the
PRG
(
29
) key; the
following message will appear on the display
Access to menus
press a selection key.
Access and modification of sub-menus
Use the "
+
"
(
30
)
and "
-
"
(
31
) keys to position the cursor (black line) on the
desired line, then press the
PRG
(
29
) key.
Use the "
+
"
(
30
) and "
-
"
(
31
) keys also to modify the
message or number.
CUSTOMER PROG.
KEY MENU
KEY MENU
Type 1
coffee
repetition
001
ater dose
110
grinder
MM
1
MM
1 cof, dose
064
+
u
u
MM
1 cof. dose 064
-5
064 +5
-
+
CUSTOMER PROG.
NOT ENABLED!
Note
: During the Data Modification phase, the cursor turns
into “
” or a slide bar with minimum and maximum settings
appears
The icons below appear in alternating order in the lower part
of the display
Exiting the programming menu
- Press the
key to confirm changes;
- Press the
RES
(
24
) key to leave settings unchanged and
exit the menu
If the "
Customer Progr.
" is set to "
NO
", the following message
will appear on the display
19.1 Key menu - Coffee selection
Press one of the coffee dispensing keys (
32
) (the relative led
will remain on). The following message will appear on the
display
The following coffee selection parameters can be modified:
- repetition
(it represents the number of distributions of the
selected drink, from 001 to 099);
- water dose
(volumetric dosage pulses, from 0 to 999, with
increments of 1);
- grinder
(chosen between grinder MM1 or MM2);
- coffee dose
... (coffee dose grinde ...impulses, 0 ÷ 200 with
increments of 1);
- water start
(determines if the water must be added (
before
)
or (
a t
) the coffee dispensing);
- Additional water
(volumetric dosage pulses, from 0 to 999,
with increments of 1).
The components - * - are applied only in some produit
configurations
The dose setting for both grinders has a field range of
+ 5 of
the value set in the technical programming menu.
ampl
technical programming
customer programming
coffee dose MM1
045
coffee dose MM1
040÷050
coffee dose MM2
020
coffee dose MM2
015÷025
KEY MENU
Type 1
coffee
repetition
001
ater dose
110
grinder
MM
1
MM
1 cof, dose
064
+
u
u
80
English
Summary of Contents for Q10
