START WASHING
Empty the container
and re-fill it
with fresh water
insert milk pipe
as per instructions
WASH COMPLETED
MACHINE READY
Press the key
and wait
until the machine performs an
automatic washing cycle (approximately
2 minutes).
The message below will appear on the
display:
9
WASHING IN PROGRESS
The washing cycle has ended
when this message appears on the
display:
10
Eliminate any remaining washing
solution in the container and add
about 0.7 liters of cold water, leaving the
milk intake tube in the container:
11
Press the key
; the message
below will appear on the display:
12
WASHING IN PROGRESS
The washing cycle has ended
when this message appears on the
display:
13
Remove the washing container.
Remove the milk intake tube from
the container and reposition the tube
back into the milk container.
14
Press the key
to return to the
wash cycle screen and the
RES
(
24
)
key to return to normal work mode.
Do not remove the container during the washing
procedure: otherwise, the washing cycle must
be repeated.
Selection block -
This occurs after 60’ of functioning from the
preset time if the washing cycle has not taken place, with the
“Block milk circuit”
function enabled (YES) by the installer.
66
English
