Checking the water level in the tray
1
When the tray is filled with water, the
words “EMPTY ME” appear in the special
slot on the grid.
A
16
Carefully remove the tray and empty the
water. Pull out the drawer (
16
); lifting it
slightly at points (
A
).
Note: It is advisable to periodically empty the water that collects in the tray and not wait for it to completely fill with water.
2
(*)
3
Open the lock (
F
).
(*)
Self version only
EMPTY ME
F
8.2 Dispensing of beverages - cappuccino / milk
GENERAL INDICATIONS
Milk is a delicate biological product and can easily deteriorate.
Heat modifies its structure. Milk must be kept at a storage
temperature
no higher than 5°C (41°F)
from the moment the
container is opened and throughout its entire period of use.
Our storage appliances
MODULO MILK + CUP
are suitable
for this purpose.
NOTE: at the end of the work day (or not more than 24 hours
from the time the container is opened), any remaining milk
must be discarded.
Preliminary operations
Insert the tube (
40
) of the dispenser (
1
) into the milk
container.
Place the cup under the dispenser (
1
).
If necessary, adjust the dispenser height.
Cappuccino dispenser
Press the cappuccino dispensing button corresponding to the
required dose. The selected key remains pressed and the
beverage is dispensed.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time by
pressing the same key again.
Milk dispenser
Press the milk dispensing button corresponding to the required
dose. The selected key remains pressed and the beverage is
dispensed.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time by
pressing the same key again.
OPTIONS
The options indicated in section “
Dispensing of beverages
- General indications
” are available.
The technician who installs the machine can also be asked to
personalize the cappuccino buttons in the following ways:
- milk dispensing before the coffee or vice versa (only when
cappuccino is dispensed);
Proceed as explained in section “
CUSTOMER PROGRAMMING
”
to obtain hot or tepid milk.
1
40
60
English
