Connecting the Machine – Modulo Milk + Cup
Please follow these steps to connect the
MODULO MILK +
CUP
to the machine:
1) insert the milk intake tube (
40
), from the machine, in
the manifold (
C
) positioned in the specific hole of the
MODULO MILK + CUP
;
2) Place the module next to the machine as shown in the
figure. Make sure the manifold (
C
) is inserted in the side
hole of the machine;
3) Insert the intake tube (
40
) into the milk container;
4) Insert the milk container in the
MODULO MILK + CUP
and close the door.
When placing the
MODULO MILK + CUP
next to
the machine, make sure the control panel can be
opened.
The correct position is show below:
Connecting the machine to a generic fridge module
Besides being able to connect the machine to the
MODULO
MILK + CUP
,
it can also be used with a generic milk cooler.
The position of the generic milk cooler is different from the
position of the
Modulo Milk + Cup
. For example, the illustration
here shows how to connect the machine to the milk cooler
positioned underneath the machine counter.
Note: In this case, the milk intake tube (
40
) comes from the
machine base and not from the side as with the
MODULO
MILK + CUP
.
The installer connects the milk tube.
1
2
3
4
40
40
C
40
61
English
