background image

By pressing the Esc button from either the Auto,  CloseOpen or Exit
screens, you will return to the Session Mode screen.

6. From the LCD screen for the session mode (Auto, Open or Closed) you wish to use, press
the 

Yes

 button to validate your choice. Alternatively, press the 

Yes

 button from the 

Exit

screen if you wish to exit without changing the session mode. You will return to the 

Setup

screen.

7. Press the 

Esc

 button once to return to the 

Copy Start

 screen.

8. Press the 

Yes

 button to launch duplication. Copying will begin as normal, and any

changes you made to the session mode parameter in step 6 will be taken into account. A
screen will indicate that duplication is underway.

9. When duplication has finished, the Dupli 125 will beep repeatedly to show the process has
been successful and the following screen will display:

10. Open the front door (if necessary) and press the 

Yes

 button. The CD-RW drives will eject

the target discs. The recorded CDs will have either a closed session or an open session,
depending on what you chose in step 6.

When the process is complete, the unit will automatically return to the 

Copy Start

 menu.

>> OPEN ?

>> EXIT ?

i

PROCESS  COMPLETE
EJECT: PRESS  YES

>> CLOSE ?

Summary of Contents for Dupli 125



















































Reviews: