12. When duplication has finished, the Dupli 125 will beep repeatedly to show the process
has been successful and the following screen will display:
13. Open the front door (if necessary) and press the
Yes
button. The CD-RW drives will eject
the target discs.
When the process is complete, the unit will automatically return to the
Copy Start
menu.
4.2.3 Verify and Read Check functions
This section describes how to carry out the Verify and Read Check function. The Verify
function is used to verify data, whereas the Read Check function is used to check audio
material. Our example uses the Verify function, but the procedure for choosing Read Check
is exactly the same.
The Write Speed and Session Mode parameters are not used in the Verify
and Read Check functions.
1. With your Dupli 125 turned on, go to the
Copy Start
screen:
2. Push the DVD-ROM drive’s load/ eject button to open the disc tray and insert the
appropriate master disc. Push the load/eject button again to close the tray.
3. Push the CD-RW drives’ load/ eject buttons to open the disc trays and insert the
corresponding target discs. Push the load/eject buttons again to close the trays. Wait until
both the master and target discs have been initialized (when the drives’ LEDs stop blinking).
Make sure that you insert matching master and target CDs when performing
the Read Check and Verify operations. If the master and target CDs do not
have exactly the same material, the operation will fail.
PROCESS COMPLETE
EJECT: PRESS YES
COPY START ?
(CDtoCD)
i
i
Summary of Contents for Dupli 125
Page 1: ...LaCie Dupli 125 User s Manual ...
Page 50: ...NOTES ...