background image

Getting To Know Your LaCie Drive

10

LaCie Dupli Disc CD121

User’s Manual

2. Getting To Know Your LaCie Dupli Disc CD121

2.1. Minimum System Requirements

For use as an external CD-RW drive:

2.2. Supported CD Formats

Your LaCie Dupli Disc CD121 can record most of the popular CD formats, including:

x

CD-ROM

x

Photo CD

x

CD-ROM XA 

x

Video CD

x

CD-DA (audio)

x

CD-Plus (CD-Extra)

x

CD-Mixed mode

Important Note:

The LaCie Dupli Disc CD121 cannot duplicate copy-protected CDs and Karaoke CDs (CD-G).

2.3. LaCie Dupli Disc CD121 – Views

1 Load/Eject buttons -

Opens and closes the media trays.

2 Start button -

To start the duplication/operation.

3 Power LED - 

Lights up when the LaCie Dupli Disc CD121 is plugged in

and turned on.

4 Busy/Activity LED -

Lights up or blinks when a CD/CD-R or CD-RW is

inserted in the disc tray and accessed by the drive.

5 Status LEDs -

Indicates the LaCie Dupli Disc CD121 status and the

operation in process.

6 Speed LEDs -

Indicates the current duplication speed.

7 Mode LEDs -

Indicates the current operation mode of the LaCie Dupli Disc

CD121.

8 Headphone Jack -

To connect 3.5 mm mini-jack stereo headphones. Set

volume to low before inserting headphones.

9 Volume Knob -

Adjusts headphone volume level. Turn right to increase

volume and left to decrease volume.

Hardware Requirements:

Mac or PC with USB 1.1 or USB 2.0 interface.

System Requirements:

Mac OS 9.1 and 10.1.2 or later
Windows 98 SE (Second Edition), Windows Me (Millennium
Edition), Windows 2000, or Windows XP

Necessary Hard Disk Space Available

Minimum 100 MB for installing LaCie CD Utilities for Mac or
Windows 
Minimum 800 MB for copying a CD onto hard disk.

3

7

6

2

8

9

4

1

2.3.1. Front View

Summary of Contents for CD121








































Reviews: