2
MPORTANT SAFETY INFORMATION
The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and
situations that may occur. The operator must understand that common sense and caution are factors, which
cann`t be built into this product, but must be supplied by the operator.
Assembly / Installation Precaution
1
．
Assemble only according to these instructions. Improper assembly can create hazards.
2
．
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3
．
This unit contains pieces with sharp edges. The machined edges of the aluminium parts and the ends of
the panel clips may be sharp. Handle all parts carefully.
4
．
Keep assembly area clean and well lit.
5
．
Keep bystanders out of the area during assembly.
6
．
Do not assemble when tired or when under the influence of alcohol, drugs or medication.
7
．
Product capabilities apply to properly and completely assembled product only.
8
．
Locate the Greenhouse on a flat, level, surface. A concrete foundation is recommended for a high-quality
installation.
9
．
WARNING: The brass bushings inside the rollers of this product contain lead, a chemical known to cause
birth defects (or other reproductive harm).
Use / Service Precautions
1. This is not a toy. Do not allow children to play in or climb on this product. Although this greenhouse does
include some caps, there are still some exposed sharp edges. In addition, protective covers may fall off in
time. Children must be supervised if allowed near the greenhouse.
2. Show / Debris Accumulation Hazard. The heavy weight of accumulated snow or other debris can cause
parts of this greenhouse to buckle suddenly. Do not allow debris to accumulate on top of the greenhouse. If
snowfall is expected, place additional supports (not provided) underneath the Crow. Never enter a
greenhouse with accumulated debris on top.
3. Use as intended only.
4. Inspect periodically, replace damaged parts immediately and do not enter greenhouse if parts are loose or
damaged,
5. For your safety
，
service and maintenance should be performed regularly by a qualified technician.
