Labrie MINIMAX, Maintenance Manual, Page: 34 / 174

26 General Maintenance
Maintenance personnel must perform weekly inspection and maintenance. Greasing all moving parts
on a daily basis is very important and proper adjustment of the limit and proximity switches is
mandatory, especially on vehicles equipped with a multi-cycle feature. For more information on the
lubrication schedule, see
Lubrication Charts on page 62.
Any problems found on the packing system must be corrected immediately. In case of problem,
contact your distributor.
Figure 3-2 The packer
Figure 3-3 Packer components
Preparing for Packer Inspection
To prepare the packer for inspection:
1.
Park the vehicle on level ground and apply the parking brake.
2.
Fully extend the arm.
3.
Remove the tailgate safety pins (see Figure 3-6).
Danger!
Always lock out and tag out the vehicle when inspecting it or performing maintenance
on it (see Locking Out and Tagging Out the Vehicle on page 20).
Roller Side rail