manualshive.com logo in svg

Labrie MINIMAX, Maintenance Manual

Introducing DALBO Minimax user manual, a must-have resource for product owners. This comprehensive manual covers all aspects of operating your DALBO Minimax, ensuring smooth and efficient use. Download this valuable manual for free at manualshive.com and maximize your understanding of this remarkable product.

Share
Download
background image

88

Hydraulic System

Figure 5-15      Quick-connect coupler

6.

Put the transmission in Neutral, start the engine and engage the hydraulic pump.

7.

Adjust gripper pressure:

7 a.

Close the gripper using the corresponding lever on the valve.

7 b.

While maintaining the lever in place, adjust the relief valve of the “gripper close” side of the 
valve section to 1200

 

psi (screw or unscrew depending on the gauge readout).

7 c.

Open the gripper and maintain the lever in place.

7 d.

While maintaining the lever in place, adjust the relief valve of the “gripper open” side of the 
valve section to 750

 

psi (screw or unscrew depending on the gauge readout).

Figure 5-16      Gripper relief valve adjustment screws

Warning!

Make sure that the ball valve on the suction line is completely open before starting the 
engine. Failure to do so may damage the hydraulic system.

“Gripper close” 
relief adjustment 
screw

“Gripper open” relief 

adjustment screw

Summary of Contents for MINIMAX















































































































































































Reviews:

No comments

Related manuals for MINIMAX

Brands by name

Popular brands

Load more brands