Labrie AUTOMIZER HELPING-HAND, Operator'S Manual

Page: 23 / 118

Safety 13

Do not use the body safety prop to prop a loaded body.
General Precautions
It is the employer’s responsibility to ensure that only qualified employees operate this vehicle.

Read and make sure that you fully understand this manual and all safety decals before operating
this vehicle. Maintenance personnel must also read and understand the Maintenance Manual for
this vehicle
. In case of doubt, ask a supervisor for clarifications.

Before every work day, inspect the body, the packing system, and any system that might
compromise public and/or operator safety.

Verify that the accelerator pedal, the steering wheel, mirrors, brakes, and turn signals are in good
working order.

When driving the vehicle, keep both hands on the steering wheel at all times.

Stop the vehicle completely and put on the parking brake before leaving the driving position.

When the vehicle is parked, the parking brake
must
be applied.

Before activating the automated arm , operators shall make sure that people and obstructions are
far away from the vehicle. Operators must be able to stop the arm at all times.

Before activating the bucket (on units equipped with the optional bucket ), operators shall make
sure that people and obstructions are far away from the vehicle. Operators must be able to stop the
bucket at all times.

2R-III
TM
vehicles are primarily designed to be operated by only one person. However, if Labrie
Enviroquip Group customers elect to operate the vehicle with more than one worker, additional
safety items shall be installed
to protect the co-worker from hazardous situations.
I
MPORTANT
:
In such cases, Labrie Enviroquip Group must be informed of every and all units that will be operated
by more than one worker. Labrie Enviroquip Group will then determine and supply, at the
customer’s expense, the required safety items. For additional information, please contact Labrie
Plus
at 1-877-831-8250 in Canada or 1-800-231-2771 in the U.S.

Do not operate this vehicle if there are any signs of damage or incomplete repairs.

Report any doubts that you might have and any safety service requirements regarding this vehicle
to a supervisor.
Warning! Prior to its first use, your 2R-III
TM
must be completely lubricated , as shown on the Lube Chart
sticker located on the body curbside, near the hopper.
Initial lubrication carried out by Labrie Enviroquip Group is sufficient for production and
transport purposes
only .
Danger! Operators must adhere to the following precautions at all times. Failure to do so may
result in vehicle and/or property damage, personal injury, or even death.