Labrie AUTOMIZER HELPING-HAND, Operator'S Manual

Page: 110 / 118

100 Operating the A
UTOMIZER
TM
H
ELPING
-H
AND
The multi-cycle function allows the packer to perform up to 8 cycles when pressing the start cycle
button (green button). Standard factory preset of the module is 3 cycles.
Unloading
Unloading Procedure
Once you have completed your collection route, park the lifting arm or the bucket inside the hopper
(the crusher panel [if installed] must be in the up position). Keep some garbage not packed in front
of the packer in order to facilitate the unloading process.
The following is the standard unloading procedure:
1.
Drive the vehicle to the landfill.
2.
Ensure the vehicle is on safe, stable and level ground.
3.
Check the overhead clearance before opening the tailgate and raising the body.
Make sure the air suspension is dropped or the tag axle is down (if equipped).
4.
Remove both tailgate safety pins.
Figure 4-14 Safety pin
Warning! Ensure the overhead is clear before raising the body.