manualshive.com logo in svg

Labrie AUTOMIZER HELPING-HAND, Operator'S Manual

Share
Download
Labrie AUTOMIZER HELPING-HAND Operator'S Manual Download Page 94

84

Operating the A

UTOMIZER

TM 

H

ELPING

-H

AND

Visual Inspection

Before starting the vehicle, the operator MUST perform a visual inspection of the truck. Ensure the 
engine is not running and the parking brake is set.

N

OTE

:

Some of the items mentioned in this manual are optional and may not be found on your 
A

UTOMIZER

TM 

H

ELPING

-H

AND

.

As part of the visual inspection, you must:

Ensure the cleanliness of lamps, safety decals, camera lenses, mirrors, windows, and the vehicle in 
general.

Ensure that safety equipment is available on board (i.e. fire extinguisher, first-aid kit).

Ensure there is no structural damage.

Ensure that there is no unusual wear, distortion, cracking, leaning, leaking on the vehicle.

Ensure that the hydraulic oil level (sight gauge on tank) is as recommended (cylinders must be 
collapsed).

Ensure that the hydraulic cylinders do not leak and mounting pins are secure.

Ensure that the hydraulic tank shut-off valve is fully open.

Ensure there is no mechanical problem: structure, rollers, hinges, door locks, wear items, etc. 
Report any defective system to maintenance personnel.

Ensure there are no leaks, cracks or other types of problems on the frame area, fuel tank, hydraulic 
tank, air tanks (air tanks must be drained every day), cleaning trap and wheels.

Ensure that the tailgate is fully closed and BOTH tailgate safety pins are in place.

Once the visual inspection is over, you must start the engine to check if the systems are working 
properly.

Starting the Vehicle

To start the A

UTOMIZER

TM 

H

ELPING

-H

AND

:

1.

Before starting the engine, check the following items:

1 a.

Transmission shifter is on neutral.

1 b.

Parking brake is on (see 

Parking Brake

 on page 79).

1 c.

Hydraulic system is off (see 

Hydraulic Pump Switch

 on page 70).

2.

Start the vehicle as stated in the chassis manufacturer’s manual.

3.

Switch ON

 

the pump to engage the hydraulic system (see 

Hydraulic Pump Switch

 on page 70).

Air pressure has to be at a minimum of 70

 PSI.

4.

Turn ON all light switches.

5.

If required, move the truck to an appropriate area to perform the daily inspection.

6.

Report any defective system to the maintenance personnel.

Summary of Contents for AUTOMIZER HELPING-HAND























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands