Labomed 6129000-795 User Manual Download

Page: 34 / 67

MAGNA

11. EXPLANATION OF SYMBOLS

6129000-795

Magna

Issue 1.7
Printed on May,2020

Warning:

Observe all warning labels and notes! If any label in missing on your instrument or has

become illegible, please contact the manufacturer to obtain new labels.

Caution label:

Observe all caution notes to avoid any unwanted situation with the instrument.

Brightness Control:

After the illumination has been switched on, the user can continuously

adjust brightness by turning the knob appropriately.

Accompanying documents must be consulted.

Compliance to medical device directive 93/42/EEC.

Suspension Arm Locking.

This way up – indicates the correct upright position of the transport package.

Keep dry – the transport package shall be kept away from rain.

Year of manufacture used on product data plate.

Fragile- content of the transport package are fragile and should be handled with care.

Electromagnetic interference can occur in the vicinity of devices carrying this symbol.

Alternate current.

Recycling of packaging materials.

Tension Adjustment.

Separate disposal of waste electrical equipment.

Unsafe for use with MR (Magnetic Resonance).

Do not over balance more than 5°.

For ABA (Auto Balancing Arm) Power.

Summary of Contents for 6129000-795




































































Search results

Summary of Contents for 6129000-795

Reviews:

Related manuals for 6129000-795

Brands by name

Popular brands

Labomed 6129000-795, User Manual

Search results

Summary of Contents for 6129000-795

Reviews:

Related manuals for 6129000-795

Brands by name

Popular brands