07052013RS01
Cat. No. 9.900.900.758
CopyRight © 2013
Page
15
of
20
4-3.
Setting Time
▶
Speed setting unit: 1min. or 10 min./ 1 sec. or 10 sec.
Action
Time is down-counted after starting centrifugation.
1.
Touch the [TIME] button once.
‘MIN’ on LED is flickering.
2.
Touch the [
▲▼
] buttons to change input value.
After keeping holding finger on the [
▲▼
] buttons for 5
seconds, the unit of setting value is changed to 10min.
from 1 min.
If you do not touch the [
▲▼
] button for 5 seconds, the
setting mode is cleared.
3.
Touch the [Enter]
button to pass ‘SEC’ value setting.
4.
Touch the [
▲▼
] buttons to change input value.
After keeping holding finger on the [
▲▼
] buttons
for 5 seconds, the unit of setting value is changed
to 10 sec from 1 sec.
If you do not touch
the [▲▼] button for 5 seconds, the setting
mode is cleared.
5.
Touch the [Enter] button to complete the setting.
4-4.
Acceleration / Deceleration
Use the adjustment function of acceleration & deceleration levels to protect sensitive samples.
Action
1.
Touch [ACC/DEC] button.
2.
Touch the
[▲▼] buttons to change input ACC value.
ACC blinks on the ACC/DEC display.
Input the desired level of ACC from 1 to 9. (Level 9: The
fastest acceleration)
If you do not touch
the [▲▼] button for 5 seconds, the
setting mode is cleared.
3.
Fix the ACC level by touching [Enter] button.
4.
Touch the
[▲▼] buttons to change input DEC value.
DEC blinks on the ACC/DEC display.
Input the desired level of DEC from 0 to 9. (Level 0: Natural
deceleration / Level 9: The fastest deceleration)
If you do not touch
the [▲▼] button for 5 seconds, the
setting mode is cleared.
5.
Fix the DEC level by touching [Enter] button.
