8
6. Open the cam handles on the casting stand and position the cams so they face
downwards. Position the ENDURO VE10 Gel insert on the gasket of the casting
stand so the key holes are facing the cams. The top of the ENDURO VE10 Gel
insert will need to be pushed down very slightly to insert the cams.
7. With the cam handles facing directly downwards, rotate the cams in the opposite
direction 180
0
or until the insert has tightened down onto the gasket
. Do not
overturn as this will cause the glass plates to push upwards and the
assembly will be more likely to leak.
NOTE: Always reverse the gasket after casting to avoid indentations. Do not
leave glass plates tightened into the casting stand for long periods of time as
this can cause damage the silicone mat. The unit is now ready for gel
preparation.
