Figure 25. Sensor identifications; sensors found
If necessary, enter identifiers for the sensors in the
Description
field and press the
Save
button.
If the control unit does not identify all connected sensors.
Check the sensor connections.
Once you have conducted the check, press the
Detect sensors
button again.
The control unit will look for the sensors for approx. 2 minutes, unless it has already found
three sensors. After the search, the device shows the number of sensors found in the
browser view and the
System OK
message in the control unit display.
The sensor detection can be interrupted by pressing the
Stop detection
button.
Installation and Operating Instructions | idOil Solar
25/58
DOC001599-EN-3
