manualshive.com logo in svg

LabJack UE9, User Manual

The LabJack UE9 user manual is a comprehensive, step-by-step guide designed to assist users in maximizing the potential of their UE9 device. Available for free download from our website, this manual provides detailed instructions and valuable insights on utilizing every feature of the LabJack UE9 for optimal results.

Share
Download
background image

 

Warranty:

The LabJack UE9 is covered by a 1 year limited warranty from LabJack Corporation, covering this product and parts against
defects in material or workmanship.  The LabJack can be damaged by misconnection (such as connecting 120 VAC to any of the
screw terminals), and this warranty does not cover damage obviously caused by the customer.  If you have a problem, contact
[email protected] for return authorization.  In the case of warranty repairs, the customer is responsible for shipping to LabJack
Corporation, and LabJack Corporation will pay for the return shipping.

 

Limitation of Liability:

LabJack designs and manufactures measurement and automation peripherals that enable the connection of a PC to the real-
world. Although LabJacks have various redundant protection mechanisms, it is possible, in the case of improper and/or
unreasonable use, to damage the LabJack and even the PC to which it is connected. LabJack Corporation will not be liable for
any such damage.

Except as specified herein, LabJack Corporation makes no warranties, express or implied, including but not limited to any implied
warranty or merchantability or fitness for a particular purpose. LabJack Corporation shall not be liable for any special, indirect,
incidental or consequential damages or losses, including loss of data, arising from any cause or theory.

LabJacks and associated products are not designed to be a critical component in life support or systems where malfunction can
reasonably be expected to result in personal injury. Customers using these products in such applications do so at their own risk
and agree to fully indemnify LabJack Corporation for any damages resulting from such applications.

LabJack assumes no liability for applications assistance or customer product design. Customers are responsible for their
applications using LabJack products. To minimize the risks associated with customer applications, customers should provide
adequate design and operating safeguards.

Reproduction of products or written or electronic information from LabJack Corporation is prohibited without permission.
Reproduction of any of these with alteration is an unfair and deceptive business practice.

 

Conformity Information (FCC, CE, RoHS):

See the Conformity Page and the text below:

 

FCC PART 15 STATEMENTS:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense. The end user of this product should be aware that any changes or modifications made to this equipment without the
approval of the manufacturer could result in the product not meeting the Class B limits, in which case the FCC could void the user's
authority to operate the equipment.

 

Declaration of Conformity

:

Manufacturers Name:  LabJack Corporation
Manufacturers Address:  3232 S Vance St STE 100, Lakewood, CO  80227, USA

Declares that the product

Product Name:  LabJack UE9 (-Pro)
Model Number:  LJUE9 (-Pro)

conforms to the following Product Specifications:

EN 55011 Class B
EN 61326-1: 2002 General Requirements

and is marked with CE

 

RoHS:

The UE9 (-Pro) is RoHS compliant per the requirements of Directive 2002/95/EC.

 

1 - Installation on Windows

The LJUD driver requires a PC running Windows. For other operating systems, go to labjack.com for available support. Software

2

Summary of Contents for UE9























































































Reviews:

No comments

Related manuals for UE9

GEARTRONICS G-Dash Colour Dashboard Installation & Setup preview
G-Dash Colour Dashboard
Brand: GEARTRONICS Pages: 16
Onset InTemp CX450 Manual preview
InTemp CX450
Brand: Onset Pages: 6
Dataq DI-4730 User Manual preview
DI-4730
Brand: Dataq Pages: 38
Racelogic PROLITE User Manual preview
PROLITE
Brand: Racelogic Pages: 20
OVARRO Eureka5 User Manual preview
Eureka5
Brand: OVARRO Pages: 50
Omega Engineering OM-CP-PRTRANSIS-A2 OM-CP-PRTRANSIS-A2 Instruction Sheet preview
OM-CP-PRTRANSIS-A2 OM-CP-PRTRANSIS-A2
Brand: Omega Engineering Pages: 6
Sony SCX-16W Instruction Manual preview
SCX-16W
Brand: Sony Pages: 300
SATO 8191-00 Instruction Manual preview
8191-00
Brand: SATO Pages: 28
TFA KlimaLogg Base 30.5022 Instruction Manual preview
KlimaLogg Base 30.5022
Brand: TFA Pages: 72
Fluke 1743 User Manual preview
1743
Brand: Fluke Pages: 80
Vaisala MRG112 Technical Reference preview
MRG112
Brand: Vaisala Pages: 29
Agilent Technologies 34970A User Manual preview
34970A
Brand: Agilent Technologies Pages: 356
Lascar EL-SIE-2 Manual preview
EL-SIE-2
Brand: Lascar Pages: 5
Omron ZR-RX40 Startup Manual preview
ZR-RX40
Brand: Omron Pages: 46
Omron ZR-RX70 User Manual preview
ZR-RX70
Brand: Omron Pages: 127
Canary Systems MLGPS-P-24S User Manual preview
MLGPS-P-24S
Brand: Canary Systems Pages: 98
GRAPHTEC GL450 Quick Start Manual preview
GL450
Brand: GRAPHTEC Pages: 2
VOLTCRAFT DL-100T Operating Instructions Manual preview
DL-100T
Brand: VOLTCRAFT Pages: 8

Brands by name

Popular brands

Load more brands