LabJack UE9 User Manual Download Page 4 | Manualshive

Page: 4 / 86

background image

application might prompt for a device reset.
Reset: Click to reset the selected device.
Test: Opens the window shown in Figure 1-2. This window continuously writes to and reads from the selected LabJack.

Figure 1-2. LJControlPanel Test Window

Selecting Options=>Settings from the main LJControlPanel menu brings up the window shown in Figure 1-3. This window allows
some features to of the LJControlPanel application to be customized.

Figure 1-3. LJControlPanel Settings Window

Search for USB devices: If selected, LJControlPanel will include USB when searching for devices.
Search for Ethernet devices using UDP broadcast packet: Normally, Ethernet connected devices are found using a
broadcast of the DiscoveryUDP command documented in Section 5.2.3. On some networks, however, it might not be
desirable to broadcast these UDP packets. There are also situations where a network might have proper TCP
communication between the PC and LabJack, but the broadcast UDP packet does not work.
Search for Ethernet devices using specified IP addresses. When this option is selected, LJControlPanel will specifically
search over TCP using each address in the list. On some networks this might be preferred over the UDP broadcast search.

1.2 - Self-Upgrade Application (LJSelfUpgrade)

Both processors in the UE9 have field upgradeable flash memory. The self-upgrade application shown in Figure 1-4 programs the
latest firmware onto either processor.

First, put valid values in the “Connect by” box. If USB, select first found or specify a local ID. If Ethernet, specify the IP Address.
These values will be used for programming and everything else.

Click on “Get Version Numbers”, to find out the current firmware versions on the device. Then use the provided Internet link to go to
labjack.com and check for more recent firmware. Download firmware files to the …\LabJack\LJSelfUpgrade\upgradefiles\
directory.

Click the Browse button and select the upgrade file to program. Based on the file name, the application will determine whether the

4

«
...
2
3
4
5
6
...
»

Summary of Contents for UE9























































































Reviews:

No comments

Related manuals for UE9

Brand: Colorado time systems Pages: 24

Brand: FDK Pages: 2

Brand: Intech Instruments Pages: 4

Brand: Hioki Pages: 12

Brand: Hioki Pages: 40

Brand: Extech Instruments Pages: 15

Brand: UEi Pages: 19

Brand: Eagle Tree Systems Pages: 17

CO2Meter SAN-11

Brand: GasLab Pages: 11

Brand: Ebro Pages: 40

Brand: Omega Pages: 32

Brand: Seneca Pages: 8

Brand: T&D Pages: 71

Brand: WEBTEC Pages: 44

Brand: JOUSING Pages: 5

Brand: Global Water Pages: 27

Brand: Global Water Pages: 28

Brand: Global Water Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands